Categories
Categories
RF35‐48‐55- UPRIGHT PROFILE ROLL FORMING MACHINE
Product Description
UPRIGHT PROFILE ROLL FORMING MACHINE
Model: YX35‐48‐55
Machine Layout:
Hydraulic De-coiling---Material guiding---Levelin---Hydraulic punching---Roll forming---Length sizing---Cutting the panel---Panels to the collecting platform---Finish
Work piece drawing:
Main composition of the machine
The machinery line consists of 5.0 tons hydraulic de-coiler , material guiding , leveling , hydraulic punching , forming roller system, hydraulic cutting system ,run-out table, control cabinet with PLC.
Technical parameters:
- Matching material: G.I or M.S
- Material thickness range:1.2-1.8mm
- Main motor power: 15kw
- Forming speed:1-3m/min(include punching and cutting time)
- hydraulic station power:22kw
- Quantity of stands:about 16
- Shaft Material and diameter:¢75mm, material is 40CR
- Material Of The Stations: Guide rail style
- Tolerance:3m+-1.5mm
- Way Of Drive:1.5 inch single chain
- Controlling system:PLC
- Total weight:about 8 Tons
- Voltage: 380V/ 3phase/ 50 Hz
- Size of the machine:L*W*H 11.5m*1.5m*1.2m
- Material of forming rollers:Gcr 15, coated with chromed treatment
- Material of cutter blade:Cr 12 mould steel with quenched treatment 58-62
Cutting and the Control Cabinet
Cutting:
1) Cutting motion: The main machine automatically stops and then cutting. After the cutting, the main machine will automatically start.
2) Material of blade: GCR12with heat treatment
3) Length measuring: Automatic length measuring
4) Tolerance of length: +/- 1.5mm
Control Box: Brand Panasonic
1) Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase (this is can depend on customer request)
2) Automatic length measurement:
3) Automatic quantity measurement
4) Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
5) Length inaccuracy can be amended easily
6) Control panel: Button-type switch and touch screen
7) Unit of length: millimeter (switched on the control panel)
Packing List details
1) 5 ton hydraulic de-coiler: 1 set
2) Main roll forming machine:1 set
3) Hydraulic punching system: 1 set
4) Hydraulic cutting system: 1 set
5) Hydraulic station: 1 set
6) Control box: 1 set
7) Hydraulic cutting: 1 set
8) Run-out table: 1 set
9) Punching mould: 1 set
10) Cutting mould: 1 set